Micro duct end cap
micro duct end cap
Email: haidatelecom@126.com
To keep MicroDuct networks free of debris, seal the system with Push-Fit End Caps. With the same functionality as the Push-Fit Connectors, installation simply involves pushing the MicroDuct into the End Cap. The End Cap can be attached and removed 10 times while still maintaining the same high performance characteristics.
Push-Fit MicroDuct End caps operate at 15 BAR (218 psi) with a maximum permissible leakage rate of 1cc/min. This is equivalent to 1 bubble every 3 seconds. Higher pressures have been used in the field with no increase in leakage rate. Quick Burst rating is 25 BARS (363 psi).
Feature:
Material: |
Clear PC |
Leakage Pressure: |
15bar |
Negative Pressure: |
-750mmHg(10 Torr) |
Proof Pressure: |
25bar |
Temperature Range: |
-10 ~ 60℃ |
For Tubing Type: |
PE, PU, Nylon, Polyurethane |
Specification:
No. |
Model No. |
For Tube OD(mm) |
1 |
E05 |
5 |
2 |
E07 |
7 |
3 |
E08 |
8 |
4 |
E10 |
10 |
5 |
E12 |
12 |
6 |
E14 |
14 |